|

Share:


HP Aruba JX954A: Aruba IAP-207 (RW) Instant 2x2:2 11ac Access Point

RM1,150.00

Quantity: In Stock


Quantity:


Specifications

SKU: JX954A

Weight(grams): 590

Description

Model: JX954A
HP Aruba IAP-207 (RW) Instant 2x2:2 11ac Access Point



The affordable, mid-range Aruba 207 Series access point delivers high performance 802.11ac for medium density enterprise environments, such as schools, retail branches, warehouses, hotels and enterprise offices, where the environment is cost sensitive.

The compact Aruba 207 Series AP delivers a maximum concurrent data rate of 867Mbps in the 5GHz band and 400 Mbps in the 2.4GHz band (for an aggregate peak data rate of 1.3Gbps).

With the integrated Bluetooth Aruba Beacon, the 207 Series AP provides advanced location and indoor way finding, and proximity-based push notification services while simplifying the remote management of battery-powered Aruba Beacons. Also for improved network simplicity and security, Dynamic Segmentation automatically enforces real-time device-level access policies on Aruba wired and wireless networks.



Key Features

  • Dual Radio 802.11ac Access Point
  • Built-in Bluetooth Low-Energy (BLE) radio
  • Advanced Cellular Coexistence (ACC)
  • Quality of service for app visibility and control
  • RF Management
  • Intelligent app visibility and control
  • Security
  • AP-207 (controller-managed) and IAP-207 (Instant)


Specification 


WI-FI RADIO SPECIFICATIONS

    • AP type: Indoor, dual radio, 5GHz 802.11ac 2x2 MIMO and 2.4GHz 802.11n 2x2 MIMO
    • Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
    • 5GHz: Two spatial stream Single User (SU) MIMO for up to 867 Mbps wireless data rate to individual 2x2 VHT80 client devices
    • 2.4GHz: Two spatial stream Single User (SU) MIMO for up to 400 Mbps wireless data rate to individual 2x2 VHT40 client devices (300 Mbps for HT40 802.11n client devices)
    • Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio
    • Supported frequency bands (country-specific restrictions apply):
      • 2.400 to 2.4835 GHz
      • 5.150 to 5.250 GHz
      • 5.250 to 5.350 GHz
      • 5.470 to 5.725 GHz
      • 5.725 to 5.850 GHz
    • Available channels: Dependent on configured regulatory domain
    • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
    • Supported radio technologies:
      • 802.11b: Direct-sequence spread-spectrum (DSSS)
      • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
    • Supported modulation types:
      • 802.11b: BPSK, QPSK, CCK
      • 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
    • Transmit power: Configurable in increments of 0.5 dBm
    • Maximum (conducted) transmit power (limited by local regulatory requirements):
      • 2.4GHz band: +18 dBm per chain, +21 dBm aggregate (2x2)
      • 5GHz band: +18 dBm per chain, +21 dBm aggregate (2x2)
      • Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
    • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
    • Maximum ratio combining (MRC) for improved receiver performance
    • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
    • Short guard interval for 20 MHz, 40 MHz and 80 MHz channels
    • Space-time block coding (STBC) for increased range and improved reception
    • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
    • Transmit beam-forming (TxBF) for increased signal reliability and range
    • Supported data rates (Mbps):
      • 802.11b: 1, 2, 5.5, 11
      • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
      • 802.11n: 6.5 to 300 (MCS0 to MCS15)
      • 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80
    • 802.11n high-throughput (HT) support: HT 20/40
    • 802.11ac very high throughput (VHT) support: VHT 20/40/80
    • 802.11n/ac packet aggregation: A-MPDU, A-MSDU
WI-FI ANTENNAS

AP-207/IAP-207: Two integrated dual-band downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 3.9dBi in 2.4GHz and 6.8dBi in 5GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.
  • Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the effective per-antenna pattern is 2.7dBi in 2.4GHz and 4.8dBi in 5GHz

OTHER INTERFACES

  • One 10/100/1000BASE-T Ethernet network interface (RJ-45)
    • Auto-sensing link speed and MDI/MDX
    • 802.3az Energy Efficient Ethernet (EEE)
  • Bluetooth Low Energy (BLE) radio
    • Up to 3dBm transmit power (class 2) and -92dBm receive sensitivity
    • Integrated antenna with roughly 30 degrees downtilt and peak gain of 2.2dBi
  • Visual indicators (multi-color LEDs): for System and Radio status
  • Reset button: factory reset (during device power up)
  • Serial console interface (proprietary; optional adapter cable available)
  • Kensington security slot

POWER SOURCES AND CONSUMPTION


  • The AP supports direct DC power and Power over Ethernet (PoE)
  • When both power sources are available, DC power takes priority over PoE
  • Power sources are sold separately
  • Direct DC source: 412Vdc nominal, +/- 5%
    • Interface accepts 2.1/5.5-mm center-positive circular plug with 9.5-mm length
  • Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af/802.3at compliant source
    • Unrestricted functionality with 802.3af PoE
  • Maximum (worst-case) power consumption: 12.3W (PoE) or 10.1W (DC)
  • Maximum (worst-case) power consumption in idle mode: 5.3W (PoE) or 4.4W (DC)
  •  
MECHANICAL

  • Dimensions/weight (unit, excluding mount accessories):
    • 150mm x 150mm x 40mm
    • 380g
  • Dimensions/weight (shipping):
    • 190mm x 180mm x 70mm
    • 590g

WARRANTY

Aruba limited lifetime warranty





 Inquiry - HP Aruba JX954A: Aruba IAP-207 (RW) Instant 2x2:2 11ac Access Point